New German sign |
Old German sign |
English name |
Chinese name |
GB code |
DIN EN ISO 4014 |
DIN 931-1 |
Hexagon head bolts - Product grades A and B (ISO 4014:1999) |
Hexagonal head tap bolt |
GB/T 5782-2000 |
DIN EN ISO 4016 |
DIN 601 |
Hexagon head bolts - Product grade C (ISO 4016:1999) |
Hexagonal head tap bolt C level |
GB/T 5780-2000 |
DIN EN ISO 4017 |
DIN 933 |
Hexagon head screws - Product grade A and B (ISO 4017:1999) |
Hexagonal head tap bolt perfect thread |
GB/T 5783-2000 |
DIN EN ISO 4018 |
DIN 558 |
Hexagon head screws - Product grade C (ISO 4018:1999) |
Hexagonal head tap bolt perfect thread C level |
GB/T 5781-2000 |
DIN EN ISO 8676 |
DIN 961 |
Hexagon head screws with metric fine pitch thread - Product grade A and B (ISO 8676:1999) |
Hexagonal head tap bolt fine thread perfect thread |
GB/T 5786-2000 |
DIN EN ISO 8765 |
DIN 960 |
Hexagon head bolts with fine pitch thread - Product grades A and B (ISO 8765:1999) |
Hexagonal head tap bolt fine thread |
GB/T 5785-2000 |
DIN EN ISO 4032 |
DIN 934 |
Hexagon nuts, style 1-Product grades A and B (ISO: 4032:1999) |
1 hexagonal nut |
GB/T 6170-2000 |
DIN EN ISO 4033 |
|
Hexagon nuts, style 2-Product grades A and B (ISO: 4033:1999) |
2 hexagonal nuts |
GB/T 6175-2000 |
DIN EN ISO 4034 |
DIN 555 |
Hexagon nuts - Product grade C (ISO 4034:1999) |
Hexagonal nut C level |
GB/T 41-2000 |
DIN EN ISO 4035 |
DIN 439-2 |
Hexagon thin nuts(chamfered)-Product grade A and B (ISO 4035:1999) |
Hexagonal thin nut |
GB/T 6172.1-2000 |
DINEN ISO 4036 |
DIN 439-1 |
Hexagon thin nuts - Product grade B(unchamfered) (ISO 4036:1999) |
The hexagonal thin nut does not have the bevel edge |
GB/T 6174-2000 |
DIN EN ISO 8673 |
DIN 934| DIN 971-1 |
Hexagon nuts, style 1, with metric fine pitch thread - Product grades A and B (ISO 8673:1999) |
1 hexagonal nut fine thread |
GB/T 6171-2000 |
DIN EN ISO 8674 |
DIN 971-2 |
Hexagon nuts, style 2, with metric fine pitch thread - Product grades A and B (ISO 8674:1999) |
2 hexagonal nut fine thread |
GB/T 6176-2000 |
DIN EN ISO 8675 |
DIN 439-2 |
Hexagon thin nuts with metric fine pitch thread - Product grades A and B (ISO 8675:1999) |
Hexagonal thin nut fine thread |
GB/T 6173-2000 |
DIN EN ISO 4762 |
DIN 912 |
Hexagon socket head cap screws (ISO 4762:1997) |
In hexagonal round column head bolt |
GB/T 70.1-2000 |
DIN EN ISO 7380 |
|
Hexagon socket button head sxrews (ISO 7380:1997) |
In hexagon even cup head screw |
GB/T 70.2-2000 |
DIN EN ISO 10642 |
DIN 7991 |
Hexagon socket countersunk head screws (ISO 10642:1997) |
In the hexagon sinks a bolt |
GB/T 70.3-2000 |
DIN EN ISO 1207 |
DIN 84 |
Slotted cheese head screws-Product grade A (ISO 1207:1992) |
Slot round column head bolt |
GB/T 65-2000 |
DIN EN ISO 1580 |
DIN 85 |
Slotted pan head screws-Product grade A (ISO 1580:1994) |
Slot women's hairdo with hair in a spiral on top or behind the head bolt |
GB/T 67-2000 |
DIN EN ISO 2009 |
DIN 963 |
Slotted countersunk flat head screws (common head style) (ISO 2009:1994) |
The slot sinks a bolt |
GB/T 68-2000 |
DIN EN ISO 2010 |
DIN 964 |
Countersunk slotted raised head screws (common head style) - Produce grade A (ISO 2010:1994) |
The slot partly sinks a bolt |
GB/T 69-2000 |
DIN EN ISO 7045 |
DIN 7985 |
Pan head screws with type H or type Z cross recess-Product grade A (ISO 7054:1994) |
Cross trough women's hairdo with hair in a spiral on top or behind the head bolt |
GB/T 818-2000 |
DIN EN ISO 7046-1 |
DIN 965 |
Countersunk flat head screws (common head style) with type H or type Z cross recess, product grade A-Part 1:Steel of property class 4.8 (ISO 7046-1:1994) |
The cross trough women's hairdo with hair in a spiral on top or behind the head bolt 1st part: Steel 4.8 levels |
GB/T 819.1-2000 |
DIN EN ISO 7046-2 |
DIN 965 |
Cross recessed countersunk flat head screws (common head style), product grade A-Part2:Steel of property class 8.8, stainless steel and nonferous metals (ISO 7046-2:1990) |
The cross trough sinks the bolt 2nd part: Steel 8.8, stainless steel A2-70 and non-ferrous metal CU2 or CU3 |
GB/T 819.2-1997 |
DIN EN ISO 7047 |
DIN 966 |
Countersunk raised head screws (common head style) with type H or type Z cross recess-Product grade A (ISO 7047:1994) |
The cross trough partly sinks a bolt |
GB/T 820-2000 |
DIN EN ISO 7048 |
|
Cross recessed cheese head screws (ISO 7048:1998) |
Cross trough round column head bolt |
GB/T 822-2000 |
DIN EN ISO 10644 |
|
Screw and washer assemblies with plain washers-Washer hardness classes 200HV and 300HV (ISO 10644:1998) |
Bolt or bolt peaceful gasket assembly |
GB/T 9074.1-2002 |
DIN EN ISO 10510 |
|
Tapping screw and washer assemblies with plain washers (ISO 10510l:1999) |
Tapping screw peaceful gasket assembly |
GB/T 9074.18-2002 |
IDN EN ISO 15480 |
|
Hexagon washer head drilling screws with tapping screws thread (ISO 15480:1999) |
The hexagonal flange from drills the tapping screw |
GB/T 15856.5-2002 |
IDN EN ISO 15481 |
|
Cross recessed pan head drilling screws with tapping screw thread (ISO 15481:1999) |
The cross trough women's hairdo with hair in a spiral on top or behind the head from drills the tapping screw |
GB/T 15856.1-2002 |
IDN EN ISO 15482 |
|
Cross recessed countersunk head drilling screws with tapping screw thread (ISO 15482:1999) |
The cross trough sinks from to drill the tapping screw |
GB/T 15856.2-2002 |
IDN EN ISO 15483 |
|
Cross recessed raised countersunk head drilling screws with tapping screw thread (ISO 15483:1999) |
The cross trough partly sinks from to drill the tapping screw |
GB/T 15856.3-2002 |
DIN EN ISO 10669 |
|
Plain washers for tapping screw and washer assemblies - Normal and large series - Product grade A (ISO 10669:1999) |
The plain washer uses in the tapping screw and the gasket assembly |
GB/T 97.5-2002 |
DIN EN ISO 10673 |
|
Plain washers for screw and washer assemblies - Small, normal and large series - Product grade A (ISO 10673:1998) |
The plain washer uses in the bolt and the gasket assembly |
GB/T 97.4-2002 |
DIN EN ISO 2338 |
DIN 7 |
Parallel pins, of unhardened steel and austenitic stainless steel (ISO 2338:1997) |
Cylindrical pin not hardened steel and austenite stainless steel |
GB/T 119.1-2000 |
DIN EN ISO 8733 |
DIN 7979 |
Parallel pins whit internal thread, of unhardened steel and austenitic stainless steel (ISO 8733:1997) |
Box thread cylindrical pin not hardened steel and austenite stainless steel |
GB/T 120.1-2000 |
DIN EN ISO 8734 |
DIN 6325 |
Parallel pins, of hardened steel or martensitic stainless steel (Dowel pins) (ISO 8734:1997) |
Cylindrical pin hardened steel and martensitic stainless steel |
GB/T 119.2-2000 |
DIN EN ISO 8735 |
DIN 7979 |
Parallel pins with internal thread, of hardened steel and martensitic stainless steel (ISO 8735:1997) |
Box thread cylindrical pin hardened steel and martensitic stainless steel |
GB/T 120.2-2000 |
DIN EN ISO 8748 |
DIN 7344 |
Spring-type straight pins, coiled, heavy duty (ISO 8748:1997) |
Elastic cylindrical pin volume system heavy |
GB/T 879.3-2000 |
DIN EN ISO 8750 |
DIN 7343 |
Spring-type straight pins, coiled, standard duty (ISO 8750:1997) |
Elastic cylindrical pin volume system standard type |
GB/T 879.4-2000 |
DIN EN ISO 8751 |
|
Spring-type straight pins, coiled, light duty (ISO 8751:1997) |
Elastic cylindrical pin volume system light |
GB/T 879.5-2000 |
DIN EN ISO 8752 |
DIN 1481 |
Spring-type straight pins, slotted, heavy duty (ISO 8752:1997) |
Elastic cylindrical pin straight flute heavy |
GB/T 879.1-2000 |
DIN EN ISO 13337 |
DIN 7346 |
Spring-type straight pins, slotted, light duty (ISO 13337:1997) |
Elastic cylindrical pin straight flute light |
GB/T 879.2-2000 |
DIN EN ISO 1234 |
DIN 94 |
Split pins (ISO1234:1997) |
Cotter pin |
GB/T 91-2000 |
DIN EN ISO 7089 |
|
Plain washers-Normal series-Product grade A |
Plain washer A level |
GB/T 97.1-2002 |
DIN EN ISO 7090 |
|
Plain washers, chamfered-Normal series-Product grade A (ISO 7090:2000) |
Plain washer bevel edge A level |
GB/T 97.2-2002 |
DIN EN ISO 7091 |
|
Plain washers-Normal series-Product grade C (ISO 7091:2000) |
Plain washer C level |
GB/T 95-2002 |
DIN EN ISO 7092 |
|
Plain washers-Small series-Product grade A (ISO 7092:2000) |
Small gasket A level |
GB/T 848-2002 |
DIN EN ISO 7093-1 |
|
Plain washers-Large series-Part 1: Product grade A (ISO 70931-1:2000) |
Big gasket A level |
GB/T 96.1-2002 |
DIN EN ISO 7093-2 |
|
Plain washers-Normal series-Part 3: Product grade C (ISO 70936-2:2000) |
Big gasket C level |
GB/T 96.2-2002 |
DIN EN ISO 7094 |
|
Plain washers-Extra large series - Product grade C (ISO 7094:2000) |
Especially big gasket C level |
GB/T 5287-2002 |
DIN EN ISO 7040 |
DIN 982| DIN 6924 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1 - Property classes 5,8 and 10 (ISO 7040:1997) |
1 inlays the hexagon stopping nut nonmetallic |
GB/T 889.1-2000 |
DIN EN ISO 7042 |
DIN 980| DIN 6925 |
Prevailing torque type all-metal hexagon nuts, style 2 - Property classes 5,8, 10 and 12 (ISO 7042:1997) |
2 pure metal hexagon stopping nut |
GB/T 6185.1-2000 |
DIN EN ISO 7719 |
|
Prevailing torque type all-metal hexagon nuts, style 1- Property classes 5,8 and 10 (ISO 7719:1997) |
1 pure metal hexagon stopping nut |
GB/T 6184-2000 |
DIN EN ISO 10511 |
DIN 985 |
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:1997) |
Inlays a hexagon to lock the thin nut nonmetallic |
GB/T 6072.2-2000 |
DIN EN ISO 10512 |
DIN 982| DIN 6924 |
Prevailing torque type hexagon nuts (with non-metallic insert), style 1, with metric fine pitch thread-Property classes 6,8 and 10 (ISO 10512:1997) |
1 inlays the hexagon stopping nut fine thread nonmetallic |
GB/T 889.2-2000 |
DIN EN ISO 10513 |
DIN 980| DIN 6925 |
Prevailing torque type all-metal hexagon nuts, style 2, with metric fine pitch thread - Property classes 8,10 and 12 (ISO 10513:1997) |
2 pure metal hexagon stopping nut fine thread |
GB/T 6185.2-2000 |